济南装载机http://m.132p.cn/变速箱是装载机中重要的配件之一，在装载机工作过程中，经常出现乱挡或跳挡等现象，装载机变速箱乱挡或跳挡直接原因是变速阀杆定位不准确，如变速阀杆与阀体内两只定位钢球没有对准人槽或两只定位钢球之间的弹簧损坏因而定位错乱变速操纵杆由于长期受拉、推操纵力的作用杆系，位置或长度发生了变化使操纵位置产生偏差因而造成错位。
Jinan loader gearbox is one of the important parts loader, loader work in process, often chaotic phenomena such as block or skip, or skip loader gearbox chaos is the direct cause of the shift gear stem positioning is not accurate a shifting the stem and the valve body positioning two balls did not spring damage at a person or two slots positioned between the balls and thus positioning confusion due to the long-standing role in the shift lever pull, push rod system control force, position, or length changes in the position of the manipulator deviations thereby causing dislocation.
   
济南装载机http://m.132p.cn/变速箱跳挡时应该先拆下变速阀杆与操纵杆的连接销，用手拉动变速阀杆使阀杆处于空挡位置，再将操纵杆手柄扳到空挡位置，最后调整各杆系连接处的位置及改变其长度，并将处于空挡位置的操纵杆手柄和处于空挡位置的变速阀杆重新连接起来。
Jinan loader gearbox should be removed when the jump gear shift lever connecting pin stem and hand speed to pull the stem so that the stem is in the neutral position, and then pull the handle lever to the neutral position, and finally adjust the truss position and change its length, and the handle is in the neutral position and the lever is in the neutral position of the shift reconnect stem junction.