山东装载机所有操作要在油温降低后进行
[ 发布日期：2023-01-07 15:10:28 ] 来源:永?；? 浏览：783次
1、山东装载机http://m.132p.cn/接油容器放在放油螺栓下，取下螺栓，并放油，为防止山东装载机邮箱内油突然流出，松开螺塞，并逐渐取下螺栓，放油后，装在螺塞并拧紧。
Shandong loaders drip container placed under the oil drain plug, remove the bolt, and put the oil, in order to prevent a sudden outflow of oil Shandong loaders mailbox, release the plug, and gradually remove the bolts, put the oil, the
mounted screw plug and tighten.
2、山东装载机接油容器放在山东装载机变速箱滤油器下，取下山东装载机变速箱滤油器放油螺塞，放油后拧紧螺塞。
Shandong loaders drip container placed under the Shandong loader gearbox oil filter, remove the filter Shandong loader gearbox oil drain plug after the oil drain plug and tighten.
3、取下山东装载机螺塞、盖，并取出滤网，清除粘在山东装载机滤网上的赃物，然后用柴油或清洗油清洗，如滤网损坏，更换。
Remove Shandong Loader plug, cover, and remove the filter, remove the filter stick to the stolen goods Shandong loader, then wash or clean diesel oil, such as the filter is damaged, replace it.
4、重新安装山东装载机http://m.132p.cn/滤网，经加油口注入一定数量的机油，加油时，检查油位。
Reinstall Shandong loaders filter, the fuel filler into a certain amount of oil, refueling, check the oil level.
