山东装载机产生拉缸故障的原因有哪些？
[ 发布日期：2023-01-07 15:10:28 ] 来源:永保机械 浏览：748次
1.冷却系统出现故障，机器出现过热，活塞受热后膨胀过大。
1 cooling system failure, the machine appears overheating, the piston is expanded after heat.
2.山东装载机 http://m.132p.cn/机油油量不足、变质或含有杂质，引起润滑不良。
2 the amount of oil is insufficient, metamorphic or contain impurities, causing bad lubrication.
3.活塞与气缸壁间隙过小(多见于新机或刚大修过的柴油机)。
3 piston and cylinder wall clearance is too small (more common in the new machine or just overhaul of the diesel engine).
4.山东装载机 http://m.132p.cn/活塞环折断或卡死。
4 piston ring broken or stuck dead.
5.活塞销卡簧失效，使活塞销发生窜动。
5 piston pin clamping spring failure, so that the piston pin.
1 cooling system failure, the machine appears overheating, the piston is expanded after heat.
2.山东装载机 http://m.132p.cn/机油油量不足、变质或含有杂质，引起润滑不良。
2 the amount of oil is insufficient, metamorphic or contain impurities, causing bad lubrication.
3.活塞与气缸壁间隙过小(多见于新机或刚大修过的柴油机)。
3 piston and cylinder wall clearance is too small (more common in the new machine or just overhaul of the diesel engine).
4.山东装载机 http://m.132p.cn/活塞环折断或卡死。
4 piston ring broken or stuck dead.
5.活塞销卡簧失效，使活塞销发生窜动。
5 piston pin clamping spring failure, so that the piston pin.
