随着济南装载机http://m.132p.cn/产量的提高，以及外观油漆套色作业的大量使用，整机涂装线在使用过程中存在哪些问题呢？

1、套色作业使得济南装载机外表面的喷漆时间缩短，而屏蔽时间非但没有缩短，还有加长的趋势，使得整个流水线的节拍发生了变化，在产量低的时候还影响不大，只不过一些工位增加了等待时间，产量增大后就需要将部分屏蔽工作放在线下进行。
Chromatic paint job so that the outer surface of the loader Jinan time shortened, but the time has not only shorten the shield, as well as lengthen the trend, making the entire pipeline to the beat changed, in low yield when it has little effect, but some stations increasing the waiting time, increases the yield after work needs to be placed under the partially shielding conducted online.

2、由于济南装载机整个生产线的节拍缩短，而水迹烘干室有一个升温的过程，这样一来温度刚升到有时甚至还没有升到规定温度就需要转到下一工位，根本就不能发挥作用，而水迹烘干室是通过式的，打开门后温度立即下降到环境温度。
Because the entire production line Jinan loaders beat shortening and water stains drying room has a heating process, so that the temperature rise and sometimes just do not need to rise to a predetermined temperature to the next station, simply can not play role, while traces of water by drying room type, the temperature dropped immediately after opening the door to the ambient temperature.

3、济南装载机http://m.132p.cn/烘干室也存在和水迹烘干室一样的问题，不能充分发挥烘干作用。各室体的大门采用气动门，开关的时间较长，完全打开或完全关闭约3-5min，在整个节拍较长时还不觉得，在节拍缩短后就显得有点过长了。
Jinan loaders drying room and there are traces of water drying room the same problem, can not give full play to the drying effect. Each room door body pneumatic doors, switch a long time, fully open or fully closed about 3-5min, the

longer the time do not feel the whole tempo, beat shortening in seemed a bit too long after.