装载机http://m.132p.cn/发动机正常工作时，燃油消耗量远远超过正常标准。
When the loader engine work, the fuel consumption far exceeds the normal standards.

装载机http://m.132p.cn/在未超载的情况下，先检查底盘传动系和行走系是否有异常。如无异常，可检查供油系统是否供油过量。在上述检查都无异常时，应拆下喷油器，测量气缸压力，所测气缸压力不得低于3.92×103kPa(为使发动机运转稳定，各缸压力差应不超过8%)，如测量值低于此值即为发动机内部故障。
Loader in the absence of overload, check the chassis and running gear drivetrain is abnormal. Without exception, you can check whether the excess oil supply system. When these checks are without exception, should be removed injectors,cylinder pressure measurement, the measured cylinder pressure of not less than 3.92 × 103kPa (for the stable operation of the engine, each cylinder pressure difference should not exceed 8%), as measured Below this value is the internal engine failure.